A scrubber is part of laboratory exhaust systems that are intended to offer an effective means of neutralizing hazardous chemical vapors and gases before they are released into the environment. These units are typically used in conjunction with fume hoods or ducted ventilation systems during scientific activities such as acid digestion, chemical synthesis, and solvent evaporation, ensuring compliance with safety and environmental regulations.
Features
| Standard Size | 500 x 500 x 2000 mm |
| Material Specification | Polyvinyl Chloride (PVC) |
| Finishing | Fiberglass Reinforced Plastic (FRP) |
| Tank Dimension | 500 x 500 x 500 mm |
| Sum Tank Capacity | 40 L |
| Material & Spray Angle | Water & 2 sq Feet Per Area |
| Water Delivery (Flowrate) | 1.11 L/min at 20 psc |
| Volume/Nozzle (Direct Spray Size) | 1/8 in |
| Air Resistance / Pressure | 2 in w.g |
Water Pump Set
| Discharge Head | 21 m |
| Total Head | 30 m |
| Max Flow Rate | 32 liter/min |
| Material & Spray Angle | Water & 2 sq Feet Per Area |
| Power | 0.37 KW / 220V / 50Hz / 1 Phase |
Filter Set
| Type | Exchangeable |
| Material | Polypropylene |
| Efficiency | 98% |
Demister Filter Set
| Material | Polypropylene |
| Quantity | 1 pcs |
| Size | 203 mm |
| Thickness | 30 mm |
Model
| Model | Scrubber |
| Code | NDS-SCR |
The unit package includes 1 lot of 8″ PVC piping with magnetic contactor switch, output & input piping lines for the fume hood system, plus civil work & installation.
Nadiso Scrubber Model:
With more than 25 years of experience in laboratory furniture and equipment, Nadiso delivers scrubbers with corrosion-resistant PVC construction and Fiberglass Reinforced Plastic (FRP) finishing, equipped with a Water Pump Set and high-efficiency Filter Set, backed by full technical consultation and installation support. Learn more about Nadiso on our About Us page.
The Filter Set uses exchangeable polypropylene with up to 98% filtration efficiency, complemented by a 203 mm polypropylene Demister Filter Set with 30 mm thickness to maximize the separation of water vapor from the gas stream.
The Water Pump Set has a 21 m discharge head, 30 m total head, and a max flow rate of 32 liters/min, running on 0.37 KW/220V/50Hz/1 phase power for optimal circulation of the neutralizing water.
The scrubber package includes 1 lot of 8″ PVC piping with a magnetic contactor switch, output & input piping lines for the fume hood system, plus civil work & installation.
